AAG Turf Four-color Landscape Artificial Courtyard Garden Decoration Carpet Simulation Plastic Grass

Note: Artificial turf has the following eight characteristics: 1. All-weather: unaffected by climate, improving the efficiency of site utilization; 2. Evergreen: After natural grass enters its dormant period, artificial grass can still bring you a feeling of spring; 3. Environmental friendliness: All materials meet environmental requirements, and the artificial turf surface layer can be recycled and reused; 4. Simulation: Artificial grass is produced using biomimetic principles, with good elasticity and comfortable foot feel; 5. Durability: Durable and not easily faded, especially suitable for venues with high frequency of use; 6. Economy: High cost-effectiveness among peers; 7. Maintenance free: There are basically no maintenance costs incurred, only the need to prevent human damage is needed; 8. Easy construction: It can be paved on asphalt, cement, hard sand and other site foundations. Specification for AAG-UQDS40-4 Sports Artificial Lawn No.2: Product model AAG-QDS40-4 Grass silk grass height of 40 mm, row spacing of 3/8 inch Grass silk material, domestic straight and curved mixed woven four-color PE monofilament, needle pitch 160 needles/M Grass fiber fineness 13500 DTEX weight 2.6-2.7kg/m2 Bottom fabric material 2PP or mesh bottom fabric+styrene butadiene latex bottom layer cluster density 15700 needles/square meter Each roll has a width of 4 or 2 meters and is packaged in black or white PP bags Each roll has a regular length of 25M or is suitable for places such as leisure football fields, gardens, and balconies according to customer requirements Grass silk color four-color filling amount no need to fill Container loading capacity: 3500 square meters per 20 foot container; 5300 square meters/40 foot container; 6300 square meters/40 foot high cabinet. Note: Construction process and method of artificial turf: 1. The construction and laying foundation must be clean and flat (usually cement concrete or 10% cement stone powder foundation); 2. Measurement and layout. 3. According to the design plan, carry out measurement and layout. 4. Use a theodolite or other precision measuring instrument to measure whether the surrounding facilities conform to the size of the sports field. 5. Lay the artificial turf flat on the ground according to the original specifications, with a 3-8mm overlap between the turf. 6. Cut the overlapped artificial turf flat with a lawn cutter. The seam should not exceed 3 millimeters. 7. Lay the splicing tape under the cutting area, and use a glue applicator to brush the bonding adhesive on the bonding surface. After the fingers touch dry, connect and tap firmly. 8. Construction process description for grass bonding 9. The back of the lawn and the interface cloth that need to be bonded must be cleaned thoroughly, and the surface must be dry and free of moisture. 10. The ambient temperature should be above 5 ℃ and the weather should be clear for construction, otherwise it may cause excessive bonding time or even non bonding phenomenon. 11. The specific construction process of imitating real and fake lawns: 12. Glue application: Use a glue applicator to apply evenly thick and thin glue on the artificial lawn splicing tape. Do not apply glue repeatedly, and pay attention to the appropriate glue application speed. 13. Stickiness: Reasonably control the drying time according to the environmental conditions at that time. When bonding, it is required to align and bond firmly at once. 14. Pressure: After bonding, remove any surface debris and use a specialized rubber hammer to press firmly from the bonding area to both sides for a more secure bond. 15. Curing: Its curing time is generally three days. During the curing period, attention should be paid to maintenance, avoiding exposure to sunlight and water Immersion and movement. ......................................................................................................................................................................................................................................................................................................................................